| Customization: | Available |
|---|---|
| Usage: | Beer |
| Material: | Stainless Steel |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Cooling Jacket For Beer Keg yeast keg from brewing machine
The stainless steel barrels produced by our company use mirror polishing technology, the surface is bright as mirror, easy to clean, non-staining, anti-environmental, tough, heat-resistant, corrosion-resistant, combined with polishing process, and on the practical basis, it also highlights the beauty and Elegant and easy to clean.
From the style, the stainless steel barrels produced by our company are novel in style and complete in variety. There are stainless steel straight mouth barrels, stainless steel sealing barrels, stainless steel milk barrels, and stainless steel sealing barrels. There are also many stainless steel sealing barrels, stainless steel clamp sealing barrels and stainless steel buckles. Sealed barrels, stainless steel milk buckets also have clamped stainless steel milk buckets and buckled stainless steel milk buckets.
Production Process
1 Deep drawing: Special drawing presses are used to produce highly accurate, precision-dimensioned, smooth-surfaced deep-drawn parts from circular blanks.
2 Forming: Technical crimping of beads in the cold-formed keg halves. Cutting the keg halves. Making the bunghole in to half of the keg.
3 Welding in the necks: The necks are automatically welded in the top keg halves using a special method.
4 Embossing and labeling: Customer-specific data are embossed or stamped on the kegs in a special press. Such data include the customer's name, logo, type approvals and serial numbers
5 From bending, welding, rolling: The chime strips are rolled into rounds, tensed and welded fully automatically to produce the chime rings. These are rolled in a hydraulic forming press equipped with special tools.
6 Stamping and forming: The hand and drain holes are stamped and punched fully automatically by precision machines. All parts are mechanically deburred safe handling.
7 Welding the chimes on the keg halves: The chimes are welded on the top and bottom keg halves by special welding methods.
8 Circumferential welding of the two keg halves: The keg halves are welded together to obtain the complete keg on fully automatic circumferential welding machines. Hygienic, smooth, narrow, flat weld seams and perfect weld root, especially on the side in contact with the product.
9 Pickling, pre-rinsing, passivation, rinsing: The kegs are pickled, rinsed and passivated inside and out, to ensure a grease-free, hygienically sealed surface.
Materia
SUS304/2B, the thickness is using 1.2mm, 1.5mm, 18mm, 2.0mm according to the capacity and customer's requirements.
5. The pressure test
The keg is pressed with 0.5MPa and kept 3 minutes.
Factory Show:
All products are tested by ISO9001 and SGS.
"Professional manufacturer in Beer Keg,barrel,S.S Water Sink,stainless steel beer keg,Beer Keg Valve"
){kind=link}